DJI assistant 2 It is a very useful tool if you have a drone DJI, and everyone should have it! I have the version 1.1.2 available for download. I downloaded this from DJI Web site before you replace it with a new one.

Despite its usefulness, many owners of DJI drones do not even know that this software exists. It is currently available in 3 versions. Older drones such as the Spark and Mavic Pro are compatible with the standard DJI Assistant 2, while the newer Mavic drones and the Phantom 4 series have their own special versions. InspirePilots is the leading online community for DJI Inspire drone enthusiasts and a member of the DronePilots Network. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. .If you have a Mac you do not need to download the DJI Driver. Simplt download the Mac version of the Assistant software and continue to step 5. 5) Use the USB cable included and connect it to your Vision. 6) Launch Phantom 2 Vision Assistant. 7) Login to DJI (enables downloads). 8) Follow instructions & upgrade all firmware indicated. DJI have a few models of the Phantom 2 drone. Choose downloads and click on the file for your Phantom drone. Turn the transmitter on and then turn on your DJI Phantom drone. Next open the Phantom Assistant software on your laptop. Thank you for downloading DJI Phantom 2 Assistant from our software library. Each download we provide is subject to periodical scanning, but we strongly recommend you to check the package for viruses on your side before running the installation. The download version of DJI Phantom 2 Assistant is 3.0. This download is absolutely FREE. Download DJI Assistant 2 version 1.1.2. Dji Assistant per Mac Dji Assistant per Windows. In later versions you lose the ability to mod, but with version 1.1.2 you can still edit parameters if you want to. These are the download 1.1.2, The latest version is completely down in the post, and is a download directly from DJI. NOTE. We will stop distributing and updating “2.4G Bluetooth DataLink Installer v1.0.0.6”,'Phantom 2 Assistant Software v3.8, Phantom 2 Assistant Software v3.6,Phantom RC Assistant Software v1.2( for WIndows & Mac)' on May 15, 2018, including adaptations to the new version of the operating system.

Download DJI Assistant 2 version 1.1.2

Dji Assistant per Mac
Dji Assistant per Windows

In later versions you lose the ability to mod, but with version 1.1.2 you can still edit parameters if you want to. These are the download 1.1.2, The latest version is completely down in the post, and is a download directly from DJI

Premiere pro sequence presets download. * NOTE *
You can not install it normally on a Windows computer 8/10.
The drivers are not signed properly and Windows will not install them.
Is there a way to disable driver signing, and this is a standard feature in Windows.
The complete installation instructions for installation on Windows 8 e 10 They are at the bottom of this article.

What DJI Assistant?

Assistant lets you update the firmware, calibrate sensors and even read the logs.
You can also downgrade to a previous firmware, if you want. Assistant is very useful when an SD card upgrade is not successful and the drone is locked in update mode.
Even the firmware update via Assistant 2 is much faster.

You also have an option for the simulator so you can fly a simulated drone with your remote control 🙂 download game untuk pc offline ringan

The DJI server is available for Windows and Mac, Here is the latest version directly from DJI.

NOTE:

The installation of this tool on Windows 8 O 10 It requires booting in Safe Mode.
This is because 2 necessary drivers are not, or not properly signed, e Windows 8 e 10 They will not allow the installation when they are running in mode “normal”

To get into Safe Mode and disable the driver signing requirements, Proceed as follows.

• Click the Start menu and select Settings.
• Then click Update and safety.
• Then click Restore.
• Click Restart now in an advanced Start.
• then click Troubleshooting.
• then select Advanced Options.
• then select Startup Settings.
• Now click Restart.
• On the start screen, press Settings 7 or F7 to disable the application of the driver signing.

Install DJI Assistant as usual, the drivers will be installed and you will be able to use the assistant DJI.
After installation, restart the PC to run mode again “normal”.

Once the software is installed, you can use it like any other program, Safe Mode is only required during installation.
The drivers work in normal mode.Dvb t tuner software.

There are no installation problems reported for Mac!

Our DJI Phantom 4 Pro has been an absolute workhorse since DJI replaced it for free a few months ago. This thing has been all over North America with us, and has worked without any issue until this week when it started to act up. We started experiencing errors that we hadn’t seen before (compass heading, IMU exception, and cannot detect camera lens), and found the way to fix it all way via a firmware refresh! The process took us a few attempts, so we’ll save you the trial-and-error headache and show you how to refresh your DJI drone’s firmware in these easy steps!

Step 1: Format your SD card

In order to ensure that there aren’t any remnants of your old firmware, it’s important to format your SD card and start with a fresh install. You can format right through the DJI Go or DJI Go 4 apps, however what we found worked was removing the SD card from your drone and formatting it on your computer. If you have the option, we recommend formatting it in ExFAT.

Step 2: Clear your cache

Just like in step 1, we have to make sure there aren’t any remnants of your buggy firmware, so we need to clear the cache.

Power up your drone and transmitter, load up DJI Go or DJI Go 4 on your device, and then tap on the small icon on the bottom row labelled “Me”

On the next screen, tap on the gear in the top right corner to go to your settings menu.

Tap on either “Clear Cache” on the left, or the numerical value on the right that represents how much space is being used by your cache.

Tap on “Clear Firmware” on the left or the numerical value on the right, and the app will verify if you want to clear your firmware or not. Make sure that you click on “OK” when the popup appears, to wipe it from your device. We tried this by clearing ALL the caches including video, photos, etc, and it worked for us. Before you clear all your caches, make sure that you have your data backed up and feel safe deleting all of it.

Now that our caches are clear, it’s time to move on to the next step.

Step 3: Download DJI Assistant 2

DJI Assistant 2 software is available for both Mac and PC, and can be found by visiting the downloads page for your drone. The software is universal from the DJI Phantom 3, DJI Phantom 4, DJI Spark, DJI Mavic, and DJI Inspire drones, and can be downloaded from here.

Step 4: Connect your drone and refresh your firmware

Now that you have a clean device and drone, we can safely refresh the firmware! Simply start the DJI Assistant 2 software on your computer, connect your drone to your computer via the supplied USB cable, and then power up your drone. Once your drone is connected, be sure that you’re logged into DJI Assistant 2 with your DJI account (the same account that you use on your mobile device when controlling your drone).

Once your logged in, click on your drone when it appears on the screen.

Phantom 2 Assistant Software For Mac

The “Firmware Update” option should be selected by default, but if it’s not, tap on it at the top of the left column. Once you’re on the firmware update screen, you’ll see your current firmware and the option to “REFRESH” it. At the time of writing, there is only one approved firmware for the P4P, however in the past we have seen several versions that you can choose from. For this, we’ll keep it simple and just refresh your firmware.

Clicking on the refresh button will bring up a window saying that you need to be connected to the internet, your DJI device is powered on, and that you have it connected to your computer via USB. Once you’ve verified all of that, click on “START UPDATE” and make sure that you don’t disconnect your drone from the computer.

After a few minutes (up to 15 according to DJI), you should receive a message saying that the update is complete! Once it’s complete, click on the back button, and power off your drone and exit out of the DJI Assistant 2 software.

Step 5: Fly your happily refreshed drone!

Phantom 2 Vision Assistant Software For Mac

Now that your firmware is refreshed, be sure to calibrate your IMU and compass, and then take it for a flight! Simply refreshing the firmware in the above steps helped fix all of the problems that we were experiencing, and should for you too! Happy flying!